How to Test if my Spinator Table Timer is bad?

You will need a Voltage Meter to Test if your Spinator Table Timer is bad?

1. UNPLUG YOUR TABLE!!! 
2. Remove the Electrical cover inside the table .
3. Make sure all the Control Switches are set to off  = Travel and Rotation switches in Middle position is off.
4. Use caution when operating the Spinalator IST Table with top removed. NEVER place your hands inside the Spinalator IST Table compartment while the table is operating. Also be certain that you have no loose clothing or neckties that may be caught in the chains or moving parts.
   
5. Plug in the table  again Make sure nothing is moving on the table!  
6. Turn test meter to  AC voltage
   
7. Find the white wire coming of the power cord.
8. Place Red lead from meter on white wire.
9. Turn the timer to 15 minutes then Place Black lead from meter on L1 on back of timer - See Chart below 

Link to New Timer   https://spinalator.com/spinalator-timer/