Product Description
Replacement Spinalator Rollers Solid UHMW Hard Plastic
New Rollers are Black, Higher Density Plastic! They are a direct fit onto your existing bolts.
Original Mounting Bolts DO NOT work Most times!
YOU WILL NEED TO PURCHASE NEW BOLTS AT THE HARDWARE STORE. Just take the roller with you for the right diameter.
These Spinalator Rollers comes with Set of three Solid UHMW Hard Plastic Rollers. These replacement Spinalator rollers will fit all Spinalator tables with electric elevation.
If you have an old style table with the manual wheel elevation (shown below)these will NOT work!!!
If you are unsure, please call 256 245 8390.
Replacement Spinalator Table Rollers Instructions with Electric Elevation
-
Remove top from spinalator by unclamping end brackets.
-
Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height
-
Turn Roller rotation switch OFF, with one roller centered to the top of the triangle assembly.
-
UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
-
1st Roller- Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, Long Bolt . Make sure and use provided Lock Washer and Lock Nut!!!
-
Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
-
UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
-
2nd Roller-Remove Bolt from Roller and remove old spinalator Roller. Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, Long Bolt . Make sure and use provided Lock Washer and Lock Nut!!!
-
Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
-
Final Roller - Remove Bolt from Roller and remove old spinalator Roller. Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, Long Bolt . Make sure and use provided Lock Washer and Lock Nut!!!
-
Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle rollers for final test.
-
Install Top, make sure Top opening is facing the right direction on table. Fasten both End latch's.