Product Description
Replacement Rollers + Timer Kit
- Set of 3 Rollers, Timer, Knob, & Face Plate
These Replacement Rollers + Timer Kit are for Spinalator Table with Electric Roller Height Elevation, Spinalign, ATT300, Quantum 400, & ASH7000 Tables.
New Rollers are Black, Higher Density Foam!
The Roller Kit Includes:
High Density Rollers - Qty 3
Inserts - Qty 3
You should be able to re-use your old bolts and nuts. If not, please choose them from the drop down menu.
The Timer Kit includes:
Timer
Knob
Face Plate
Replacement Spinalator Roller Instructions
-
Remove top from Spinalator by unclamping end brackets.
-
Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height
-
Turn Roller rotation switch OFF with one roller centered to the top of the triangle assembly.
-
UNPLUG TABLE - Some Spinalator’s have an auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new Spinalator rollers! This will also keep you from getting shocked if you happen to touch an exposed wire.
-
Remove Bolt from Roller and remove old Spinalator Roller. Install new Spinalator roller. New style roller will have an easy one piece bearing and single bolt.
-
Ensure Hands, tools, and anything else are clear of rollers then plug up table. Turn Spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
-
UNPLUG TABLE - Some Spinalator’s have an auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new Spinalator rollers! This will also keep you from getting shocked if you happen to touch an exposed wire.
-
Ensure Hands, tools, and anything else are clear of rollers then plug up table. Turn Spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
-
Final Roller – Repeat Process
Check Chain Tension on Spinalator Roller rotation motor chain while top is removed. The Spinalator Roller tension should be like a bicycle chain; tight but not over tightened, to stretch the chain! Lube Chain with a Teflon lube. WD 40 will stop a squeak but is water based and will evaporate quickly! If you have movement in the roller after tightening chain, check Spinalator sprocket for a broken weld.
